$105
BK0246
Dry-Lub™ Dry Film Lubricant (Case)
20 oz.

Dry-Lub™ Dry Film Lubricant is a colloidal dispersion of Molybdenum Disulfide. It provides and extremely tough dry film that bonds to the surface for permanent lubrication. It withstands pressures beyond the point where other lubricants suffer fatigue. Dry-Lub™ Dry Film Lubricant does not attract dust, withstands temperatures from -32.5°F to 700°F. It provides corrosion resistance and out performs graphite. Excellent lock lubrication.

Dry-Lub™ Dry Film Lubricant is a professional molybdenum disulfide dry lubricant that bonds to the surface to form permanent layers of tough dry film. Also known as Castle "Blackie."

Uses: Wood, metal, ceramic and most plastic. See back of can for other uses.

Directions:
1. Surfaces should be clean and dry.
2. Shake can well (35-40 seconds).
3. Room temperature - hold can 6-8 inches from surface.
4. Allow surface to dry before exposing to stress.
5. Invert can, spray to clear nozzle when finished.

Used Pad: Pad must be scuffed to allow penetration of Squeal X. Because of glazing of a used pad, Squeal X may not eliminate all of the squeal. It is necessary to saturate 100% of the pad.

Storage: Store below 120°F.

Castle Product No.: C2015

Castle Products Online, Inc. accepts no liability for excessive use or misuse of this product.